KT-393 Single Axis Copy Router
The machine was equipped with two sets of molds, uses Φ5 and Φ8 milling cutters, capable of
replicating complicated hole to the work piece. By adjusting the stopper at the left of the end
milling head and the positioning bar on the profile bracket, you can mill rectangular hole with it.
All movements take place on the linear axis, while forming pin can rotate freely, allowing easy
and flexible operation. Startup switch is located at the control lever, and on the level there is joint
bearing for easy operation. Adopts pneumatic clamping operation, high automation. Rotate
raising positioning black allow three different kinds of milling depth. All linear movement bearings
and milling cutters are from Germany, durable and smooth.
MAIN TECHNIQUE PARAMETER
1.
|
Worktable size (WxH)
|
512x170mm
|
2.
|
Max. distance of milling head from left to right
|
260mm
|
3.
|
Max. distance of milling head from front to rear
|
130mm
|
4.
|
Max. space height of milling head
|
100mm
|
5.
|
Milling cutter diameter
|
3mm / 5mm / 8mm
|
6.
|
Milling cutter rotation speed
|
12000 rpm
|
7.
|
Motor power
|
1.1 Kw
|
8.
|
Motor rotation speed
|
2840 rpm
|
9.
|
Working air pressure
|
0.6-0.8Mpa
|
10.
|
Overall dimension (L×W×H)
|
640×660×1400mm
|
11.
|
Weight
|
250Kg
|
没有评论:
发表评论